Infrared inspection on Long Island

Vertix Diagnostics provides infrared inspection across Long Island, covering Nassau and Suffolk counties. Thermal imaging locates electrical faults, hidden water leaks, envelope intrusion and trapped roof moisture without cutting into the building. We are independent — we produce the report and never bid the repair work it recommends.

Request an inspection Call (516) 234-5012

Infraspection Institute Certified Infrared Thermographer seal

Certified Infrared ThermographerInfraspection Institute · FLIR E96 & T865

Night thermal image of a building facade showing the structural pattern reading through the finish. — A facade read from outside after dark. What a walk-through cannot see, a calibrated thermal camera can.

Commercial infrared inspection on Long Island

Long Island's commercial stock runs from village storefronts and medical offices to distribution warehouses along the expressway corridors, and the diagnostic problems differ with each. Warehouses bring large low-slope roof fields where trapped moisture hides until it reaches the deck. Medical and professional buildings bring critical power that cannot go down during hours.

Commercial infrared inspection covers all of it: switchgear and distribution equipment under load, roof fields surveyed after sunset, envelopes read from outside, and buried service lines located acoustically.

Warehouses and distribution
Medical and professional offices
Retail and shopping centers
Schools and institutional buildings
Multifamily and co-op buildings
Municipal and civic property

Thermal imaging inspection across Nassau and Suffolk

Thermal imaging inspection and infrared inspection describe the same work — a calibrated camera measuring surface temperature to reveal what is happening inside an assembly. On Long Island the most common calls are slab leaks in houses on grade, roof saturation on flat commercial roofs, and electrical faults in buildings whose service was extended piecemeal over decades.

Every thermal finding is confirmed with a second instrument — a moisture meter, an acoustic correlator, or tracer gas — before it appears in a report you can hand to a contractor.

Where we work on Long Island

Nassau County is covered town by town, with a dedicated page for each of 63 communities from Great Neck to Massapequa. Suffolk is served across its western and central townships. If your address is not listed, call and we will tell you plainly whether we can reach you.

Browse Nassau County areas

Common questions

Infrared inspection on Long Island — answered.

What does an infrared inspection on Long Island cost?

Pricing depends on the building, the service, and the size of the area surveyed — a single-family slab leak investigation and a 60,000 square foot warehouse roof survey are different jobs. We quote a flat inspection price after a short conversation about what you are seeing, rather than an hourly rate that grows while we search.

Do you cover Suffolk County as well as Nassau?

Yes. Our service area spans Long Island across Nassau and Suffolk, along with the five boroughs of New York City. Travel time to eastern Suffolk can affect scheduling, so give us as much notice as you can for those addresses.

Are you a plumbing or roofing company?

No, and that is the point. We perform diagnostics only. We do not repair, re-pipe, re-roof, or perform electrical work, and we accept no referral fees from the contractors who do. The report is our entire product, so nothing in it is shaped by work we would stand to win.

Services by area

Find your service and your county.

Each of these has a page covering how the survey runs locally, what it typically finds, and what you receive at the end.

Infrared thermography services, Long Island

Infrared thermography services across Nassau and Suffolk cover the same five disciplines — electrical, roof moisture, leak detection, envelope investigation and due diligence — for commercial, multifamily and residential property.

Thermography is the technical name for the discipline; an infrared inspection is what it produces. Both describe measuring surface temperature with a calibrated camera to find what a visual inspection cannot reach.

Thermal imaging inspection, Long Island

Thermal imaging inspection and infrared inspection describe the same work: a calibrated camera measuring surface temperature to reveal what is happening inside an assembly. Across Nassau and Suffolk the most frequent calls are slab leaks in houses on grade, roof saturation on flat commercial roofs, and electrical faults in buildings whose service was extended piecemeal over decades.

Every thermal finding is confirmed with a second instrument before it appears in a report you can hand to a contractor.

Infrared & thermal imaging

More in this service area

The broad discipline: what a calibrated thermal camera can establish about a building, and the equipment behind it.

All five service areas

Why us and not a plumber

We write the report. We never bid the repair.

A plumber who finds your leak also sells you the repair. A roofer who inspects your roof also quotes the replacement. That isn't dishonesty — it's structure, and it quietly shapes every finding. We are an independent diagnostic company: we do not perform repairs, we do not sell materials, and we take no referral fee from any contractor. The report is the entire product, so there is nothing for us to gain by finding more than is there.

No repair revenue

We can't profit from the work we recommend, because we don't do the work. If your roof is 8% wet, the report says 8% — not "replace the field."

No referral fees

We accept nothing from contractors for sending work their way. Take our findings to your own plumber, roofer, or electrician, or put them out to bid.

Findings that carry weight

Boards, managing agents, and insurance carriers treat an independent finding differently than an estimate from the company that wants the job.

We'll tell you it's nothing

Sometimes the answer is condensation, or a warm duct, or a neighbor's roof. We're paid the same either way, so we say so.

Read why independence matters →

Request an inspection in your building

Tell us what you're dealing with.

Send the details and we'll come back with a scope, a time window, and a price — including what the survey covers and what it doesn't.

Direct line

(516) 234-5012

Request received.

We'll review the details and follow up within one business day.