Electrical infrared inspection on Long Island
Electrical infrared inspection is a thermal scan of energised equipment under normal operating load, used to find abnormal heat before it becomes a failure. Nearly every electrical fault runs hot first, so a camera finds loose connections, overloading, phase imbalance and deteriorating components months before they trip, burn or cause an outage. We survey across Nassau and Suffolk and rank findings by severity so repairs can be scheduled rather than reacted to.
Certified Infrared ThermographerInfraspection Institute · FLIR E96 & T865
What gets scanned
A survey covers the equipment that carries load continuously and fails expensively — main switchgear, distribution sections, branch panels, transformers, disconnects, bus connections, motor control centres and the electrical serving mechanical plant.
Equipment must be under normal load for the results to mean anything, so surveys are scheduled during operating hours rather than during a shutdown.
- Main switchgear and service entrance
- Distribution and branch panels
- Transformers and disconnects
- Bus connections and lugs
- Motor control centres
- Generator and transfer switch
Worked to NFPA 70ESurveys of energised equipment follow the electrical safety practices set out in NFPA 70E, the Standard for Electrical Safety in the Workplace, alongside professional thermography practice.
What the scan reveals
A loosening connection develops resistance, resistance produces heat, and heat is measurable long before anything visible happens. The same is true of a phase carrying more than its share, and of a component nearing the end of its service life.
Findings are reported with thermal and visual images, the temperature differential against a reference point, and a severity ranking — so the worst item gets attention first and the marginal ones get scheduled.
Coordinated with qualified electrical personnel
Inspections follow professional thermography practice and applicable electrical safety and maintenance standards. Where access to energised equipment requires qualified electrical work — removing covers, opening enclosures — we coordinate with an appropriately qualified electrical professional rather than doing it ourselves.
We are not an electrical contractor. We find the fault and document it; your electrician corrects it.
Common questions
Electrical infrared inspection on Long Island — answered.
How often should equipment be scanned?
Most commercial and multifamily properties scan annually, and many insurance and maintenance programmes expect that interval. Facilities with heavy load, ageing distribution equipment, or a history of connection failures are often scanned every six months.
Does the power need to be off?
No — the opposite. Equipment must be energised and under normal operating load, because the heat we are looking for is produced by current flowing through a developing fault.
Will my insurance carrier accept the report?
Reports are formatted for that purpose: thermal and visual images, measured differentials, equipment identification and severity ranking. Many carriers ask for exactly this, and an independent survey carries more weight with them than one performed by the contractor bidding the repair.
Electrical thermography
More in this service area
Finding heat in energised equipment under load, ranked by severity, as preventative maintenance rather than emergency response.
Why us and not a plumber
We write the report. We never bid the repair.
A plumber who finds your leak also sells you the repair. A roofer who inspects your roof also quotes the replacement. That isn't dishonesty — it's structure, and it quietly shapes every finding. We are an independent diagnostic company: we do not perform repairs, we do not sell materials, and we take no referral fee from any contractor. The report is the entire product, so there is nothing for us to gain by finding more than is there.
We can't profit from the work we recommend, because we don't do the work. If your roof is 8% wet, the report says 8% — not "replace the field."
We accept nothing from contractors for sending work their way. Take our findings to your own plumber, roofer, or electrician, or put them out to bid.
Boards, managing agents, and insurance carriers treat an independent finding differently than an estimate from the company that wants the job.
Sometimes the answer is condensation, or a warm duct, or a neighbor's roof. We're paid the same either way, so we say so.
Request an inspection in your building
Tell us what you're dealing with.
Send the details and we'll come back with a scope, a time window, and a price — including what the survey covers and what it doesn't.
Direct line
(516) 234-5012Request received.
We'll review the details and follow up within one business day.