Serving NYC & Long Island
Staten Island
Staten Island runs from the dense North Shore around Saint George to detached housing across the middle of the island, with an East Shore that carries real flood exposure and a West Shore industrial corridor. We provide electrical infrared inspection across every neighborhood listed below, using a FLIR E96 thermal camera and confirming each finding with a second instrument before it reaches your report.
Certified Infrared ThermographerInfraspection Institute · FLIR E96 & T865
Across Staten Island
Staten Island covers several distinct kinds of building, and each one fails differently. Here's what electrical infrared inspection looks like in the ones we work in most.
Salt air is hard on terminations and enclosures. Thermal scanning finds corroded connections developing resistance well before they fail, which is the failure mode that matters most in a flood-exposed building.
Panels that have been extended over years to serve additions, pools, and finished basements are a frequent source of overloading and loose connections. Thermal scanning shows which circuits are actually carrying more than they should.
Motor control centers, three-phase distribution, and heavy continuous load make electrical infrared essential here. Phase imbalance and deteriorating contactors are found under production load, before an unplanned shutdown.
House panels, boiler-room equipment, compactor and elevator feeders carry heavy continuous load. An annual thermal survey catches the loose lug or overloaded phase before it takes out an elevator or a heating plant mid-season.
Coverage
Why us and not a plumber
A plumber who finds your leak also sells you the repair. A roofer who inspects your roof also quotes the replacement. That isn't dishonesty — it's structure, and it quietly shapes every finding. We are an independent diagnostic company: we do not perform repairs, we do not sell materials, and we take no referral fee from any contractor. The report is the entire product, so there is nothing for us to gain by finding more than is there.
We can't profit from the work we recommend, because we don't do the work. If your roof is 8% wet, the report says 8% — not "replace the field."
We accept nothing from contractors for sending work their way. Take our findings to your own plumber, roofer, or electrician, or put them out to bid.
Boards, managing agents, and insurance carriers treat an independent finding differently than an estimate from the company that wants the job.
Sometimes the answer is condensation, or a warm duct, or a neighbor's roof. We're paid the same either way, so we say so.
Request an inspection in Staten Island
Send the details and we'll come back with a scope, a time window, and a price — including what the survey covers and what it doesn't.
Direct line
(516) 234-5012We'll review the details and follow up within one business day.
